Skip to content


GUANTANAMO lock

update Jul. 14. :

thank you Alex !!

Das Schloss ist von der Firma AirTeq – sieht einem Folger Adams aber sehr ähnlich.

The lock is produced by AirTeq – very similar to a Folger Adams.

http://www.airteqsystems.com/Airteq-Products-And-Services.aspx


Hallo an Alle,

habe gerade ein Foto von Schlüsseln bekommen die in Guantanamo verwendet werden.

Hi everybody, got a picture of keys used at Guantanamo – looks like Folger Adams to me.

Any information would be welcome…..

found on http://blog.fefe.de/ July 10th

guantanamo lock







Gefunden auf   http://blog.fefe.de/ 10.Juli

Für mich sehen sie nach Folger Adams aus.

Nähere Informationen wären interessant…….

Dies ist ein Bild von dem Schlüssel aus meiner Sammlung.

This is the picture of the key out of my collection.

R0014103a

Posted in Uncategorized, high security locks, lockpicking.


KALE

Die ELF-Convention in Istanbul war ein voller Erfolg, ca. 2000 Besucher aus über 60 Nationen wurden gezählt.

KALE ist “der” Schloßhersteller in der Türkei und deswegen wurde immer wieder die Frage gestellt:

“Und was ist mit dem 10-stiftigen Kale Bohrmuldenzylinder ?”

ELF convention in Istanbul was a complete success, ca. 2000 visitors from over 60 Nations.

KALE is the leading lock manufacturer in Turkey and so many different people asked:

“What about the 10 pin Kale dimple locks ?”

Kale01a








Kale02a








Kale03a









Kurzum haben wir uns einige dieser Zylinder besorgt und versucht diese zu picken, hier die Resultate.

Bis auf den Zylinder mit dem anti picking System GTV (Erfinder Klaus Noch aus Köln) galt für alle:

So we took action and bought several of these cylinders and tried picking them.

Here are the results for all of them besides the one with the GTV anti picking construction (inventor Klaus Noch from Cologne).

DSCF0002a









DSCF0003a









DSCF0004a









1. Handpicking – kein Problem

2. Schlagschlüssel – kein Problem

3. Impressionieren – kein Problem

1. Manual picking – no problem

2. Bumping – no problem

3. Key impressioning – no problem

aber……..

Das Problem beginnt, wenn man versucht den Kern 360° zu drehen.

Dadurch, daß die obenliegenden Stifte nur sehr kurze Kernstifte haben, sind die Bohrungen im Schlüssel auch nur sehr flach.

Die genauen technischen Parameter habe ich nicht, es können aber nur so ca. 3 Schnitttiefen sein.

Wenn das Schloß nun gepickt ist und kein Gegenpart durch den Schlüssel vorhanden ist,

a) fallen die oberen Stifte so weit in den Schließkanal, daß die Feder im Schließkanal steht und abgeschert oder verbogen wird durch die Drehung des Kerns, und

b) bei Benutzung des Schlagschlüssels fangen sich die oberen Stifte in den Bohrungen des Schlagschlüssels. Der Durchmesser der oberen Stifte ist

geringfügig kleiner als der der  unteren Stifte, was reicht soweit in die Bohrungen des Schlagschlüssels einzutauchen, daß dieser sich nicht mehr

entfernen läßt. Die Bohrungen entstehen, wenn der Schlagschlüssel auf beiden Seiten auf die maximale Tiefe geschnitten wird………

but…….

problems begin when you try to rotate the plug 360° degrees.

As the upper pins have very short driver pins the distance they can travel is quite short.

I don´t have the technical parameters, but I think the possible depths in the key can only be something around three possible depths.

If the cylinder is opened with picking and the key as a counterpart is missing,

a) the upper pins can travel as far in the cylinder, that the spring is travelling over the shereline that it is shered off or bent while rotating the plug, or

b) using a bumpkey the upper pins get stuck in the drillholes of the machine prepaired bumpkey, so the key can´t be removed anymore.

The diameter of the upper pins is slightly less than the one of the lower ones. This allows them to travel in the hole of the bumpkey, which appears, when

you cut both sides to the maximum depth……..

R0013960a








Kale cylinder/bumpkey


R0013961a








Master lockpicker Julian Hardt bumping KALE


DSC00102a







Kale key during impressioning


KALE cylinder with impressioned key and original key:

R0014073a








R0014075a








R0014076a









Fazit:

Der Zylinder ist sehr einfach zu picken, aber zerstörungsfrei schließen läßt er sich nur mit einem impressionierten Schlüssel.

Conclusion:

The cylinder can be picked very easyliy, but rotating the plug 360° degrees is only possible with an impressioned key.

Posted in Uncategorized, high security locks, lockpicking, profile cylinder.


luck on ebay……..

Ich habe auf ebay eine richtige Rarität gefunden und für !!!!! 8 Euro !!!!! ersteigert – manchmal hat man auch mal Glück – 3 – 2 – 1- meins……

a








b








c








d








e








Posted in Uncategorized, lock collecting.


Hermann Arnheim, federloses zwangsgeführtes Doppelbartschloss mit geteilten Zuhaltungen…

Hier ein sehr interessantes Doppelbartschloss, welches ziemlich schwierig mittels Pickingmethoden zu öfnen sein dürfte….

Ein ähnliches Schloss mit geteilten Zuhaltungen, aber gefedert gibt es von der Firma Wertheim Wien nach dem DRP 442160 der Bauer AG Schweiz heute KABA.

Here a very interesting double bitted key lock, which should be almost impossible to pick…

A very similar lock was produced from Wertheim Wien with a split lever, but with a spring based on DRP 442160 of Bauer AG Switzerland today KABA.

a








b








c








d








e








f








g

Posted in Uncategorized, high security locks, key locks, lock collecting, lockpicking, safelocks.


CARIBIC RESIDENCY SAFE OPENING……

Caribic Residency hat letzte Woche bei mir nachgefragt, ob ich im Rahmen eines Kunstprojektes einen Tresor öffnen könnte.

Normalerweise bin ich nicht begeistert Tresore vor Publikum zu öffnen, doch das hat mich dann doch gereizt.

So wurde dann in der Caribic Residency am 25.März nachts um 22 Uhr der Tresor vor Publikum geöffnet…..

…nach 22 Minuten war die Show vorbei !!!

part1:

http://www.youtube.com/watch?v=5VNok3Nsc_c

part2:

http://www.youtube.com/watch?v=5HyED_oAVS8&feature=related


Caribic Residency asked me last week if it is possible to open a safe during their stay in Hamburg, which was a leftover in the present location.

Normally I don´t open safes in front of an audience, but this request was very sympathic and I decided to do it.

So I opened the safe on 25th of March, 10pm in front of the audience…..

…after 22 minutes the show was over !!!

part1:

http://www.youtube.com/watch?v=5VNok3Nsc_c

part2:

http://www.youtube.com/watch?v=5HyED_oAVS8&feature=related


Posted in Uncategorized, high security locks, safelocks, safeopening.


Nordmende smallest combination lock…..

Ich habe in meiner Sammlung ein Zahlenkombinationsschloss der Firma Nordmende, was sicher ein Nebenprodukt der Firma war.

I have in my collection a very interesting and rare combination lock from the Nordmende company, which does not exist anymore.

Lock production was a side kick in the production line. Nordmende was famous for TVs and radios.

Das Schloss ist hoch komplex und ich traue mich nicht es auseinanderzunehmen, da es extrem schwierig wieder zusammenzubauen sein soll.

Leider ist die Bedienung so kompliziert, daß sich das Schloss nie am Markt etabliert hat, somit ist es ein seltenes Sammlerstück.

The lock is very complicated in design and I do not dare disassembling it, as it is almost impossible to get it back together.

Too bad that the operation is very uncomfortable, so the lock never made it into the market with big quantities. That makes it a rare collectors piece.

Die möglichen Kombinationen sollen mehr als 4 Millonen betragen !!!

Possible combinations are more than 4 millions !!!

Wer an den technischen Details interessiert ist kann sich die Patentschrift ansehen.

Whoever is interested in the technical details can have a look at the patent.

Hier die Bedienungsanleitung

Here is the manual unfotunately only in german.

technisch








Als Größenvergleich ein standard Zahlenkombinationsschloss. For comparison of the size a standard combination lock.

R0013829a










R0013830a









R0013831a

Posted in DRP, Uncategorized, combination locks, high security locks, lock collecting, safelocks.


Toys for boys – Mul-T-lock

Ich habe gerade meinen Schnittzylinder entsprechend dem 1:5 Modell vom verchromen geholt und zusammengebaut.

Jord Knaap hat mir freundlicherweise den Zylinder entsprechend dem großen Modell bestiftet und ich habe dann das Schnittmodell daraus gefertigt.

Wer sich über Mul-T-lock einen Überblick verschaffen will sollte diesen Artikel lesen – der Beste, den ich bisher über dieses Schloss gelesen habe.

I just finished my Mul-T-lock cutaway exactly the same as the 1:5 factory model, freshly chromed and assambled.

Jord Knaap was so friendly to pin the cylinder matching the big model.

An absolutely must read is this article about Mul-T-lock – so far the best I know about this lock.

R0013803a









R0013804a









R0013806a









R0013810a









!!! sorry for the fingerprints !!!

Posted in Uncategorized, high security locks, lock collecting, profile cylinder.


Cool cutaways….

Vor ein paar Wochen war ich bei der Firma Wendt für ein Seminar und habe dort ein paar Aufnahmen von Schnittmodellen gemacht, die dort schon vor Jahren gefertigt wurden.

Die Idee Schnittmodelle auf diese Art und Weise zu fertigen ist super, bestimmt aber auch ziemlich zeitaufwändig.

A couple of weeks ago I did a seminar at Wendt company and was able to take pictures of some really nice cutaways which they made years ago.

I think the idea of making them this way is really nice, but time consuming.

R0013549a









R0013551a









R0013552a









R0013561a

Posted in Uncategorized, high security locks, profile cylinder.


Picking Tibbe with the “centipede”….

Ich habe gerade meinen Tibbe pick etwas modifiziert – meiner Meinung nach ist dies das beste und am einfachsten zu bedienende Tool welches es im Moment auf dem Markt gibt.

Zusammen mit dem Aufbauschlüssel ist es sehr einfach das Schloss zu öffnen, zu decodieren und den Schlüssel zusammenzustecken.

I just modified my tibbe pick a bit and wanted to show how it works, as it is in my opinion the best and easiest to use on the market.

In connection with the setup key it is very easy to open, decode the lock and make up the key.

R0013767a









R0013771a








Dadurch daß jede Position einzeln betätigt werden kann, dauert es nur Sekunden das Schloß zu öffnen, da die richtige Rastposition der Scheibe sehr leicht gefühlt werden kann.

You can operate every disc seperately with the tool and it is very easy to determine which is the correct opening position of each disc.

Alle Scheiben werden im Uhrzeigersinn auf Anschlag gedreht. Alle Scheiben außer der Code 4 Scheiben lassen sich bis zum Anschlag drehen.

Es wird über die 4er Scheiben Vorspannung gegeben, da diese schon in der korrekten Schließstellung stehen.

Die restlichen Scheiben können nun mit etwas Gefühl in die richtige Rastung gedreht werden um das Schloß zu öffnen.

All the discs are turned clockwise to the stop. All discs but the code 4 discs can rotate fully to the right.

With the Nr. 4 disc one can give tension to the core, as these discs are already in the correct opening position.

The remaining discs can be set very easy with just a bit of practice to the correct position to open the lock.

R0013760a









R0013761a








Nachdem das Schloß geöffnet ist, kann der Code ausgelesen werden und der Schlüssel nach dem Code erstellt werden.

After opening the lock, the code can be determined. With the setup key you can make the key to the code.

R0013763aa








R0013768a








R0013770a








Das Schloß könnte mit kleinen Veränderungen am Scheibendesign erheblich picksicherer gemacht werden.

With just some design changes of the discs the lock would be a lot more pickproof.


Posted in Uncategorized, car locks, lockpicking, tools.


!!! The unpickable lock !!!

Im Sommer 2009 habe ich auf einer Webseite in Asien von einem Schloß gelesen, welches als “unpickbar” bezeichnet wurde. So weit so gut, das habe ich bisher schon öfter gehört und dem keine weitere Beachtung geschenkt, da dies meistens nicht stimmt. Meine Neugier war trotzdem geweckt wegen des eigentümlichen Schließkanals. Als ich dann von meinem Freund Lars ein Schloß mit demselben Schließkanal bekam, welches sehr sehr einfach zerstörungsfrei zu öffnen war, erlosch mein Interesse.

In summer 2009 I read something about an unpickable lock on an asian website. I have read such statements a couple of times and most of the time they have not been true, so I did not pay attention to it. I still was a bit curious because of the strange keyway. Shortly after my friend Lars gave such a lock to me (I thought), which I was able to pick in seconds. After that it was not interesting anymore to me.

01a








Die Analyse ergab einen einfachen Sidebarmechanismus, der sehr leicht zu picken ist, weil die Sperrleiste vom Kern aus gegen das Gehäuse gefedert ist und keine Täuschungsverzahnungen vorhanden sind.

Durch die Rotation des Kerns wird die Sperrleiste über eine Schräge zurück in den Kern und gegen die Stifte gedrückt. Sind diese in die Öffnungslage gebracht, kann die Sperrleiste komplett zurückweichen und der Kern frei drehen.

Analysis of the lock showed a simple sidebar mechanism which is very easy to pick, as the sidebar, if rotation is applied to the core, pushes back into the core onto the pins which don´t have false notches (see picture above).

Bei einer Diskussion mit meinem Lockpickerfreund und mehrfachen Meister Julian über derartige Schlösser, erzählte Er, Er habe solch ein Schloß mit diesem Schließkanal, das sich nicht picken läßt.

Meinen Einwand ich hätte so ein Schloß schon gepickt, entkräftete Er mit der technischen Erklärung und mir war klar, daß es noch eine andere Bauart geben muß.

Mir fiel  wieder eben jenes Schloß aus Asien ein, das ich dann sofort bestellte.

In a discussion about such locks with my friend and masterlockpicker colleague Julian he told me that he has got such a lock which he is not able to pick it open. I told him that I have one like that and I can pick it in just seconds.

Julian explained the technical details to me and I understood that there have to be different types of this lock design. I remembered the Asian lock I discovered before and immediately ordered it.

padlocka






Vor ein paar Tagen frisch in der Post habe ich das Schloß natürlich sofort zerlegt und analysiert und ich muß Julian bestätigen es ist genau wie Er gesagt hat.

Some days ago I got the parcel with the lock. I took it apart and did some analysis and Julian is totally right.

!!! DAS SCHLOSS IST MIT NORMALEN PICKING METHODEN NICHT ZU ÖFFNEN !!!

!!! THE LOCK CAN´T BE PICKED WITH NORMAL LOCKPICKING ATTEMPTS !!!

Was mich besonders fasziniert ist das einfache Design. Trotz der großen Toleranzen kann man das Schloß als weitgehend picksicher bezeichnen. Natürlich ließe sich ein Öffnungswerkzeug konzipieren, aber es ist ein erhöhter Aufwand nötig um dieses Schloß zerstörungsfrei anzugreifen.

Die mechanische Sicherheit ist bestimmt verbesserungswürdig, aber das soll hier nicht weiter betrachtet werden – jeder der sich ein bischen auskennt mit Schließsystemen erkennt sofort die Schwachstellen.

What faszinated me most is the simple but effective design. Even with high tolerances the lock is almost pickproof. I am sure there are ways to overcome the mechanism, but in my opinion it takes quite some effort for an effective non destructive attack. From the mechanical side it surely can be improved, but I want to stick to the lockpicking side.

padlock01a






Ausgehend vom zerstörungsfreien Angriff möchte ich im folgenden die Funktion des Schlosses erklären.

Das System ist als Bohrmuldenschloß mit Sperrleiste zu bezeichnen.

As follows I want to explain the mechanism.

The system is a dimple lock with one sidebar.

exploded05a










Der Schließkanal ist parazentrisch angeordnet. Man könnte meinen das macht den Schließvorgang unkomfortabel, was aber nicht stimmt. Das Schloß schließt sich butterweich.

Der große Unterschied zu normalen Stiftzuhaltungssystemen ist, daß nur ein Stift und eine Feder pro Stiftposition verwendet wird, desweiteren eine Sperrleiste, die mit zwei weichen Federn gefedert ist.

In den meisten Systemen werden Stiftpaare mit jeweils einer Feder verwendet.

The keyway is paracentrical. One could think it is uncomfortable in operation, but it is the other way round, the operation is smooth. The big difference to most pin tumbler systems is the use of only one pin per position instead of top and bottom pin.

springs01aa








Das macht das Ganze schon mal sehr produktionsfreundlich. Es gibt eine fünf- und sechsstiftige Variante.

I think this is a simplification in the production process. There is a five- and six pin version.

pinsa











Der Clou an der Sache ist aber die im Kern integrierte, gegen die Stiftreihe federnde Sperrleiste. Wichtig hierbei ist auch zu verstehen, daß der Federdruck der Sperrleiste der auf die Stiftreihe wirkt, kleiner ist, als der Federdruck einer Stiftfeder. Im Gegensatz zu den meisten Konstruktionen dieser Art wirkt hier die Federkraft der Sperrleiste nach innen in den Kern, womit die Kraftübertragung nach außen an das Gehäuse effektiv verhindert wird. In diesem geschlossenen System wird keine Kraft durch eine Rotation des Kerns auf die Stifte übertragen, die man sich beim picken zunutze machen könnte.

The main thing is the sidbar which is integrated in the core and which actively pushes to the inside against the pins. It is also important to understand that the spring pressure of the sidebar is weaker than the spring pressure of one single pin spring. Contrary to most of the constructions of this kind the sidebar spring pressure is directed to the inside of the core onto the pins. The transmission of the spring resistance to the housing is effectively prevented in this way. In this closed system no force is applied to the pins over the locking bar when rotating the core, which could be used to get any feedback to pick the lock.

keys_sidebara







In der Ruheposition hält die Stiftreihe die Sperrleiste in der Aussparung des Gehäuses.

Durch Rotation des Kerns wird keine Kraft über die Sperrleiste auf die Stifte übertragen.

In neutral position the pins keep the sidebar in the locked position.

If rotation force is applied, no force is forwarded to the pins through the sidebar.

core_sidebar01a








Wird nun der richtige Schlüssel eingeführt kann die Sperrleiste in die Vertiefung der Stifte eintauchen.

If the correct key is inserted the sidebar can drop into the grove of the pins.

correct_false_keya










Die Sperrleiste ist nun deckungsgleich mit dem Kern und dieser kann jetzt gedreht werden.

In der Verschlußposition wird durch das Rausziehen des Schlüssels und das Zurückfedern der Stifte die Sperrleiste wieder in die Sperrposition geschoben.

The sidebar now is congruent with the core, which can be turned now. If the key is retracted in the neutreal position, the pins push back the sidebar to the locking position.

Heinz Pickshaus hätte große Freude am Design der Sperrleiste. Um Ihn hier zu zitieren: “Kein Pol ohne Gegenpol”

Wenn man nun von einem picking Versuch ausgeht wird schnell klar warum das bei diesem Design nicht funktionieren kann:

Das Design erfordert ein gleichzeitiges Positionieren der Stifte in der korrekten Höhe.

If one considers a picking attempt it is clear now why it does not work on this lock:

The design requires a simultaneous positioning of the pins to the correct hight.

Wird Spannung auf den Kern gegeben erreicht man dadurch gar nichts, da die Sperrleiste dann gegen das Gehäuse verklemmt wird und keine Kraftübertragung auf die Stifte stattfinden kann.

If tension is applied to the core nothing happens, as the sidebar binds with the housing but does not transfer force to the pins.

Würde es gelingen einen Stift richtig zu positionieren, müßte er auf der korrekten Position gehalten werden um mit einem anderen weiterzumachen.

Gelingt dies nicht drückt die Bewegung des Stiftes durch die höhere Federkraft der Stiftfeder die Sperrleiste wieder in die Ausgangsposition.

If it can be done, that one pin can be positioned to the correct hight it has to be held in position to go on with another pin and so on.

If it fails the spring pressure of the pin pushes back the sidebar to the neutreal position.

Hier ist es gelungen mit sehr einfachen Mitteln ein hohes Maß an Sicherheit zu erzeugen, wenn man den zerstörungsfreien Angriff zugrundelegt.

Für mich eins der besten Schlösser die ich in den letzten Jahren gesehen habe.

In this construction with simple features a very high level of security has been achieved if a non destructive attack is considered.

For me it is one of the nicest designs I have seen on the lock market the last years.



Posted in Uncategorized, high security locks, lockpicking, padlock.